SHEET PILE DRIVER

Trust & Quality with customer satisfaction

1. Economy
- No need hydraulic power pack of crane. As the Hammer Dpd-350 required 200bar and 180l/min, fuel consumption can be saved significantly. It assures good quality and satisfaction.

2. Accessibility
- Compared to with crane DPD-350 can access easily downtown areas, bridge, corner of pillar, narrow place at street where the crane can not access.

3. Low noise & Quiet
- High frequency 3000cpm has advantage of having high rate vibrations transferred to the surroundings and low noise eventually.

4. Powerful vibration
- Moreover vibration power the feeding force of excavator enhances performances.

5. Built-in control valves
- Built-in control valves on vibro hammer eliminates separate line installation on excavator. Saving installation cost as well maintenance cost considerably.

6. Simple line installation and easy operation
- Hydraulic Attachments vibro hammer needs to install electric cable on joy-stick to control valves on dpd-350 (Jaw opening and vibration).

7. 360-drgree hydraulic rotation
- Hydraulic rotation motor ensures accurate positioning of sheet pile.



Driving H pile 400x10m	Extraction sheetpile 400x12m	Driving Sheetpile 400x8m

Standard Extension Boom & External Dimensions

Tech. Spec

Model	units	DPD 350	DPD 450
Static moment	Nm	45	60
Frequency	cpm	3000	2700
Centrifugal force	kN	300	390
Amplitude	mm	6.8	7.2
Operating oil pressure	bar	200	200
Operating oil flow	l/min	180~200	200~240
Hydraulic power	kw	60	70
Height	mm	1980	2050
Length	mm	1005	1080
Width	mm	650	650
Slewing	º	360	360
Tilt angle	º	0	0
Operating weight	kg	1400	1800
Extension boom weight	kg	590	640
Acceptable excavator class	ton	20~35	35~45

Sheet pile

Model	units	DPD 350	DPD 450
Max. Length	m	11	12
Max. Weight	kg	700	980
Min. Width	mm	180	200

Tube pile

Model	units	DPD 350	DPD 450
Max. Length	m	6	7
Max. Diameter	mm	400	600

The above specification is subject to change without prior notice.